How to wall the plastic case of the roller blind, the plastic case of the roller blind is a component that is placed on the roller blind and has the function of protecting the internal mechanism of the roller blind from dust, rain and other external factors that could damage it. Usually the housing is made of durable plastic and is placed on the outside of the window or door where the blind is installed. The case can have different colors and shapes depending on the model of the roller blind and roller blind.
Video for the article at the bottom of the page
Useful materials for walling the plastic case of the blind
There are several basic steps to be followed in order to install the plastic case into which the blind winder is to be inserted. Make sure you have all the tools and materials needed for the job, including:
- Plastic case for manual roller shutter winder
- Masonry mortar
- Trowel
- Spiritual level
- Measuring tape
- Screws and dowels for attaching the cover to the wall
With these tools, you will be able to brick up the shutter winder housing
How to wall up a roller shutter winder case
First, determine the place where you intend to wall the plastic cover of the blind. Use a spirit level to check that the surface is perfectly level and mark the points where you will attach the housing.
Then take the plastic case of the manual blind winder and place it on the surface of the wall so that it respects the previously marked points. Make sure it is perfectly horizontal.
Prepare the masonry mortar with a trowel. The mortar must be strong enough not to flow, but soft enough to work. Take some mortar with a trowel and apply an even layer to the back of the box. Make sure you cover the entire surface to ensure good adhesion to the wall.
Place the box on the wall and place it exactly on the previously marked points. Press lightly so that the mortar adheres well to the wall.
Use a trowel to remove excess mortar from the sides of the crate.
Attach the cover to the wall with screws and dowels. Make sure the screws are tight to prevent the cover from moving. Let the mortar dry for the time indicated on the package. It usually takes several hours.
After the mortar has dried, you can proceed to insert the hand winder into the plastic case.
- By following these steps, you should be able to correctly pair the plastic housing of the manual blind. Always remember to follow the instructions carefully and work precisely to achieve a satisfactory result.
Illustrative video: